Dynamat 11905 The Hoodliner 1 Sheet |  | 11905Dynamat35.5 x 19 x 75 inches5 poundsList Price: $80.00Price: $40.20 | Dress up your engine compartment with a Dynamat Hoodliner. The 3/4"-thick "Sound Soaker" foam absorbs up to 87% of your engine noise, delivering a quieter listening experience in your vehicle. The reinforced aluminum skin creates a water/oil barrier that reflects 97% of radiant heat, protecting your hood's finish. Packet includes one 55-1/2" x 32-1/2" sheet (12 square feet) of Dynamat.
Features: Materials: The Hoodliner consists of three separate layers. The first layer is a 1 mil reinforced, Aluminized heat reflector and water/oil barrier. "Sound Soaker" Urethane acoustic foam forms the middle layer. The third layer is a super aggressive 4 mil acrylic adhesive with an "EZ Peel" release liner.
Benefits: The Hoodliner has the following benefits:
* Absorbs engine noise |
|   | | Buy Dynamat 11905 The Hoodliner 1 Sheet from Amazon | | Installation
Instructions: For proper installation, follow these instructions:
1. Thoroughly clean each mounting surface with a quick-drying solvent that is residue free (Isopropyl Alcohol, Acetone or Lacquer thinner), removing any grease, dirt, oil, wax, moisture or rust. With the surface clean and smooth, a permanent bond is assured.
2. Using a razor knife or scissors, cut to the desired shape and size. Remove release liner. On large area applications, remove only a portion (8-10 inches) of release liner at a time, working your way down and across the panel in sections.
3. Heating the panel surface you are mounting to before applying the material is recommended to insure proper adhesion. Also, heating the Hoodliner will make the glue stickier. This will keep the Hoodliner in full contact with the panel maximizing material efficiency.
4. Apply the Hoodliner to the panel surface, starting at the top corner and working your way down and across, pressing the material into place as you go. With a roller tool, burnish the Hoodliner to the surface. Starting from the center, work it into all contours of the panel. Even if it's a smooth panel, rolling the material will insure lasting adhesion and full contact with the panel surface removing any trapped air.
Specifications
* Temperature Range: -40 to 225 degrees Fahrenheit
* Weight LBS/SQ.FT: 0.20
* Gauge: 0.75 inches
* R-Value: 2.7
* Radiant Heat Reflection: 97%
* Flammability: Passes FMVSS-302 |
|
| | Dynamat 10435 Xtreme Door Kit 4 Sheets |  | 10435Dynamat14.6 x 75 x 60 inches1 poundsList Price: $100.00Price: $38.06 | Kit contains four 12" x 36" (305mm x 914mm) pieces of Dynamat Xtreme and includes enough material for two standard size doors.
Enjoy improved clarity, loudness and bass response from your car stereo.
Dynamat creates a "sonic barrier" restoring Decibels of lost dynamic range. |
| | | Buy Dynamat 10435 Xtreme Door Kit 4 Sheets from Amazon | | Stop fighting engine rumble, speaker rattle, road noise and buzzing vehicle parts! Apply Dynamat Xtreme to your vehicles resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo. High-performance Dynamat Xtreme is lighter than Dynamat Original, four times more effective, requires no heat to apply and is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors. Why does your car stereo sound louder when you pull off the freeway and come to a stop? Road noise steals much of the listenable portion of your music. At 70 mph, a typical automotive noise level of 85 dB leaves you with only 20 dB of listenable music. Applying Dynamat creates a 'sonic barrier' restoring 3, 6, even 12 dB of lost dynamic range. Gaining just 3 dB doubles your effective amplifier power. And that means you hear more music. Kit contains four 12' x 36' (305mm x 914mm) pieces of Dynamat Xtreme and includes enough material for two standard size doors. |
|
| | | | | Dynamat 10425 Xtreme Wedge 1 Sheet |  | 10425Dynamat22 x 75 x 18 inches13.23 poundsList Price: $40.00Price: $18.99 | Kit contains one 18"x 32" pieces of Dynamat Xtreme.
Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors.
Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations.
Apply Dynamat Xtreme to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo. |
| | | Buy Dynamat 10425 Xtreme Wedge 1 Sheet from Amazon | | Stop fighting engine rumble, speaker rattle, road noise and buzzing vehicle parts! Apply Dynamat Xtreme to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo. High-performance Dynamat Xtreme is lighter than Dynamat Original, four times more effective, requires no heat to apply and is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors. Kit contains one 18' x 32' piece of Dynamat Xtreme for general use on rear decks, doors, floors and the trunk floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations. |
|
| | Dynamat 10455 Xtreme Bulk Pack 9 Sheets |  | 10455Dynamat20.7 x 47 x 75 inches22.05 poundsList Price: $270.00Price: $96.43 | Kit contains nine 18" x 32" pieces of Dynamat Xtreme
Apply Dynamat Xtreme to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo.
Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors.
Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations. |
| | | Buy Dynamat 10455 Xtreme Bulk Pack 9 Sheets from Amazon | | Stop fighting engine rumble, speaker rattle, road noise and buzzing vehicle parts! Apply Dynamat Xtreme to your vehicles resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo. High-performance Dynamat Xtreme is lighter than Dynamat Original, four times more effective, requires no heat to apply and is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors. Kit contains nine 18' x 32' pieces of Dynamat Xtreme for rear decks, doors, floors and trunk floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations. |
|
|
|
