ISC Helicopter-OG Surface Guard Tape (Outdoor Grade): 6 in. x 20 yds. (Transparent) |  | ISC75 x 75 inchesPrice: $204.95 | Adhesive: polyurethane rubber
Backing/Carrier: polyurethane film
Release Liner: 92 lb. polycoated liner
Adhesion: 40 ounces per inch (to stainless steel)
Tensile Strength: 48 pounds per inch (longitudinal) |
|   | | Buy ISC Helicopter-OG Surface Guard Tape (Outdoor Grade): 6 in. x 20 yds. (Transparent) from Amazon | | ISC Helicopter-OG Surface Guard Tape (Outdoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter/leading edge tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or an outdoor grade. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun light, it may yellow over time. Outdoor grade provides excellent protection against ultra violet light, temperature extremes and automotive solvents. Outdoor grade will not yellow over time. Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will. Applications for the surface protection tape are endless and include: bicycle frames, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges. Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job. Super tough film requires razor knife or scissors for cutting. Supplied on 92 lb. easy release polycoated liner. Requires no heat or solvent to activate. 30 ft. (10 yd.) rolls are 8 mils thick and 60 ft. (20 yd.) rolls are 14 mils thick. * Items marked as retail package come in a retail blister pack with hanger holes (currently only the 12 ft. length rolls come in a retail package). Recently mentioned in the October 2008 issue of Motorcycle Consumer News (page 48 Product Report) |
|
| ISC Helicopter-OG Surface Guard Tape (Outdoor Grade): 4 in. x 10 yds. (Transparent) | | ISC75 x 75 inchesPrice: $60.50 | Adhesive: polyurethane rubber
Backing/Carrier: polyurethane film
Release Liner: 92 lb. polycoated liner
Adhesion: 40 ounces per inch (to stainless steel)
Tensile Strength: 48 pounds per inch (longitudinal) |
| | | Buy ISC Helicopter-OG Surface Guard Tape (Outdoor Grade): 4 in. x 10 yds. (Transparent) from Amazon | | ISC Helicopter-OG Surface Guard Tape (Outdoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter/leading edge tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or an outdoor grade. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun light, it may yellow over time. Outdoor grade provides excellent protection against ultra violet light, temperature extremes and automotive solvents. Outdoor grade will not yellow over time. Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will. Applications for the surface protection tape are endless and include: bicycle frames, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges. Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job. Super tough film requires razor knife or scissors for cutting. Supplied on 92 lb. easy release polycoated liner. Requires no heat or solvent to activate. 30 ft. (10 yd.) rolls are 8 mils thick and 60 ft. (20 yd.) rolls are 14 mils thick. * Items marked as retail package come in a retail blister pack with hanger holes (currently only the 12 ft. length rolls come in a retail package). Recently mentioned in the October 2008 issue of Motorcycle Consumer News (page 48 Product Report) |
|
| ISC Helicopter-OG Surface Guard Tape (Outdoor Grade): 4 in. x 20 yds. (Transparent) | | ISC75 x 75 inchesPrice: $137.95 | Adhesive: polyurethane rubber
Backing/Carrier: polyurethane film
Release Liner: 92 lb. polycoated liner
Adhesion: 40 ounces per inch (to stainless steel)
Tensile Strength: 48 pounds per inch (longitudinal) |
| | | Buy ISC Helicopter-OG Surface Guard Tape (Outdoor Grade): 4 in. x 20 yds. (Transparent) from Amazon | | ISC Helicopter-OG Surface Guard Tape (Outdoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter/leading edge tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or an outdoor grade. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun light, it may yellow over time. Outdoor grade provides excellent protection against ultra violet light, temperature extremes and automotive solvents. Outdoor grade will not yellow over time. Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will. Applications for the surface protection tape are endless and include: bicycle frames, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges. Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job. Super tough film requires razor knife or scissors for cutting. Supplied on 92 lb. easy release polycoated liner. Requires no heat or solvent to activate. 30 ft. (10 yd.) rolls are 8 mils thick and 60 ft. (20 yd.) rolls are 14 mils thick. * Items marked as retail package come in a retail blister pack with hanger holes (currently only the 12 ft. length rolls come in a retail package). Recently mentioned in the October 2008 issue of Motorcycle Consumer News (page 48 Product Report) |
|
| | | | ISC Helicopter-OG Surface Guard Tape (Outdoor Grade): 8 in. x 20 yds. (Transparent) | | ISC75 x 75 inchesPrice: $274.95 | Adhesive: polyurethane rubber
Backing/Carrier: polyurethane film
Release Liner: 92 lb. polycoated liner
Adhesion: 40 ounces per inch (to stainless steel)
Tensile Strength: 48 pounds per inch (longitudinal) |
| | | Buy ISC Helicopter-OG Surface Guard Tape (Outdoor Grade): 8 in. x 20 yds. (Transparent) from Amazon | | ISC Helicopter-OG Surface Guard Tape (Outdoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter/leading edge tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or an outdoor grade. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun light, it may yellow over time. Outdoor grade provides excellent protection against ultra violet light, temperature extremes and automotive solvents. Outdoor grade will not yellow over time. Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will. Applications for the surface protection tape are endless and include: bicycle frames, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges. Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job. Super tough film requires razor knife or scissors for cutting. Supplied on 92 lb. easy release polycoated liner. Requires no heat or solvent to activate. 30 ft. (10 yd.) rolls are 8 mils thick and 60 ft. (20 yd.) rolls are 14 mils thick. * Items marked as retail package come in a retail blister pack with hanger holes (currently only the 12 ft. length rolls come in a retail package). Recently mentioned in the October 2008 issue of Motorcycle Consumer News (page 48 Product Report) |
|
| | | ISC Helicopter-OG Surface Guard Tape (Outdoor Grade): 2 in. x 20 yds. (Transparent) | | ISC75 x 75 inchesPrice: $68.95 | Adhesive: polyurethane rubber
Backing/Carrier: polyurethane film
Release Liner: 92 lb. polycoated liner
Adhesion: 40 ounces per inch (to stainless steel)
Tensile Strength: 48 pounds per inch (longitudinal) |
| | | Buy ISC Helicopter-OG Surface Guard Tape (Outdoor Grade): 2 in. x 20 yds. (Transparent) from Amazon | | ISC Helicopter-OG Surface Guard Tape (Outdoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter/leading edge tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or an outdoor grade. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun light, it may yellow over time. Outdoor grade provides excellent protection against ultra violet light, temperature extremes and automotive solvents. Outdoor grade will not yellow over time. Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will. Applications for the surface protection tape are endless and include: bicycle frames, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges. Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job. Super tough film requires razor knife or scissors for cutting. Supplied on 92 lb. easy release polycoated liner. Requires no heat or solvent to activate. 30 ft. (10 yd.) rolls are 8 mils thick and 60 ft. (20 yd.) rolls are 14 mils thick. * Items marked as retail package come in a retail blister pack with hanger holes (currently only the 12 ft. length rolls come in a retail package). Recently mentioned in the October 2008 issue of Motorcycle Consumer News (page 48 Product Report) |
|
|
|
