Home : Auto Parts : Categories : Performance Parts & Accessories : Switches & Relays

1 2 3 4 5 |6| 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 >>

Switches & Relays

Relays Switches

Derale 19118 18"Hp Ss Flxfn Blkspi St "

19118

Derale

21.25 x 74 x 75 inches

3.34 pounds

Price: $28.40

Buy Derale 19118 18"Hp Ss Flxfn Blkspi St " from Amazon

DC Sports SHC4401 Hdr Scion Xa/Xb 03-04

SHC4401

DC Sports

5.91 x 65 x 75 inches

40 pounds

List Price: ~~$360.79~~

Price: $259.77

Scion xB (03-06)
4-1 One-Piece Header

Buy DC Sports SHC4401 Hdr Scion Xa/Xb 03-04 from Amazon

Built for the (03-06) Scion xB... The DC Sports headers are the benchmark by which all other headers are judged. Each one has been designed and tested on a Dynamic Test Systems engine dyno enabling the engineers to optimize their performance. Magazine and race track test proves again and again that these are the best built and best designed import headers in the world. The craftsmanship is impeccable. Some of the models are being changed to DC Sports' new single piece design. The new single piece design offers a more powerful(1-2hp over the 2 piece model) while also being lighter in weight. Not all the models can be changed to the new design because of installation difficulties. Features: CNC Machined Flanges. Mandrel Bent 1016 Mild Steel Tubing. Hardware, Instructions and Original Equipment Style Harness Included. Dyno Tested. 2 Year Warranty.

Derale 16514 14"Elecfan "

NO PHOTO

16514

Derale

19.5 x 4.5 x 16 inches

5.72 pounds

Price: $95.40

Buy Derale 16514 14"Elecfan " from Amazon

Edelbrock 3591 Oxygen Sensor

3591

Edelbrock

6 x 75 x 75 inches

0.22 pounds

Price: $59.40

Provides a solid baseline to tune the carburetor, for more power and fuel economy
Not recommended to use with leaded fuels or alcohol
Guides carburetor adjustments and improves ignition spark advance curves
Direct replacements for the sensor in Edelbrock air / fuel ratio monitors
The mounting style of the sensor is thread-in and the sensor has 3-flat female wiring harness plug

Buy Edelbrock 3591 Oxygen Sensor from Amazon

'Edelbrock 3591 EFI 02 Sensor & Bung Replacement part for use with Edelbrock 6593, Air/Fuel ratio monitor.'

Edelbrock (3812) Victor Racing Throttle Bodies - 75mm

Edelbrock

9 x 64 x 75 inches

8 pounds

List Price: ~~$414.99~~

Price: $302.25

Acura Integra
75mm

Buy Edelbrock (3812) Victor Racing Throttle Bodies - 75mm from Amazon

Built for the Acura Integra... Victor 70mm and 75mm race throttle bodies can be easily adapted to a wide variety of applications. We eliminated the idle air motor mount and all unnecessary vacuum tubes, making these throttle bodies especially well suited for racing applications. The throttle arm has a cable wheel with multiple take-off points. They are cast and fully machined by Edelbrock, then assembled by Magneti Marelli USA. Shipped complete and ready to run with a throttle position sensor installed and pre-set, these throttle bodies can be adapted to a number of applications using our 1/2' thick spacer/adapters. Intake port matching may be required in some cases. Matching Spacer/Adapter required for mounting to manifolds with stock throttle body bolt pattern.

Edelbrock 3809 Throttle Body

3809

Edelbrock

9 x 49 x 75 inches

4.36 pounds

List Price: ~~$337.03~~

Price: $308.28

Regulates the airflow through the intake manifold
Located between the air cleaner and the intake plenum
Bolts to the stock manifold, with mounts for stock sensors and vacuum lines
Made of cast aluminum multi-port injection with a natural finish
Gaskets and hardware are included

Buy Edelbrock 3809 Throttle Body from Amazon

Throttle Body, Precision Machined, Installed And Calibrated New Throttle Position Sensor, Sealed Throttle Shaft Ball Bearings, Includes Gaskets, 52mm

DIMMER PAD

9644

Mr Gasket

6 x 75 x 56 inches

0.25 pounds

List Price: ~~$10.21~~

Price: $7.39

Buy DIMMER PAD from Amazon

Mr Gasket 9644 Dimmer Pad Foot Style Turn your ordinary floor mounted dimmer switch into this whimsical bare foot shape with this easy to install pedal pad from Mr. Gasket. Polished aluminum surrounding black painted inserts makes it look cool and it's universal design will fit most applications.

Eagle Specialty Products CRS5400C3D H Beam Rods Fo

NO PHOTO

CRS5400C3D

Eagle Specialty Products

11 x 4 x 10 inches

18 pounds

Price: $446.40

Buy Eagle Specialty Products CRS5400C3D H Beam Rods Fo from Amazon

Edelbrock 38123 Throttle Body

38123

Edelbrock

6.75 x 26 x 75 inches

0.67 pounds

Price: $22.40

Includes throttle bores
Bolts directly to standard square-bore
Comes in a 75mm standard finish
Maximizes airflow and minimizes air turbulence

Buy Edelbrock 38123 Throttle Body from Amazon

DC Sports HHC5018 Ceramic Hdr Accord 98-99

HHC5018

DC Sports

18 x 32 x 75 inches

15 pounds

List Price: ~~$419.99~~

Price: $374.60

Dyno tuned and tested against the competition for maximum performance
CAD-rendered, two-piece 4-2-1 design with threaded flanges for easy installation! CNC-machined flanges and O-ring seals eliminate leaks
4-2-1 design emphasizes low and mid-range power for street/strip applications
Available in 100% 304 brushed stainless steel (including flanges), or mild steel with ceramic coating. CNC mandrel bends with robotically-welded fittings deliver perfect fit
Equal length primary piping ensures optimum tuning of systems for more power across rpm range

Buy DC Sports HHC5018 Ceramic Hdr Accord 98-99 from Amazon

DC Sports header systems are precision bent on our CNC mandrel benders using data acquired from our non-contact digitizing scanner. Our flanges are CNC machined we machine-grind the flange mating surface to ensure a leak-free seal and use a robotic welder to attach the flange to the header pipes. Our state-of-the-art manufacturing process ensures superior quality and a perfect fit with every header system we make. DC Sports 4-2-1 two-piece headers are available in 304-stainless steel and in mild steel with a proprietary temperature- and corrosion-resistant ceramic coating. Once our mild-steel systems are completed in manufacturing they are subjected to a thermal degrease and a preliminary sandblast to prepare the header%u2019s surface for coating adhesion. Every ceramic-coated system is hand-painted to ensure an even application of coating. After verifying the proper thickness of the coating the header is cured for proper bonding of the ceramic coating and then fine-blasted for a high-luster finish. Comprehensive installation instructions all necessary hardware and decals included

1 2 3 4 5 |6| 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 >>