SEARCH PRODUCTS: 
Home : Auto Parts : Categories : Oils & Fluids : Additives
1 2 3 4 5 6 7 8 9 10 11 12 |13| 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 >>

Additives

Cooling System  Engine & Oil  Fuel System  Hydraulic  Power Steering  Transmission  

7th Gear - High Performance - Fuel Stabilizer - 1 Full Case = 12 Pints

7th Gear - High Performance - Fuel Stabilizer - 1 Full Case = 12 Pints
  • 7th Gear
  • 75 x 35 inches
  • Price: $58.42
    • Eliminates clogged fuel injectors
    Stabilizes fuel in tank during long storage periods
    Guards against rust, corrosion and oxidation
    Prevents gum and varnish build-up in carburetors
    MSDS available from 7th Gear Performance Lubricants
    7th Gear - High Performance - Fuel Stabilizer - 1 Full Case = 12 Pints
    Buy 7th Gear - High Performance - Fuel Stabilizer - 1 Full Case = 12 Pints from Amazon
    7th Gear products are specifically formulated for the powersports industry. Most of the automotive oils out in the market are designed to fulfill a much different set of criteria. Those criteria are not in the best interest of your high performance powersports engine. Automotive manufacturers dictate to the oil industry, their needs and then have the oil companies formulate products to meet those needs. Two of the most important needs are higher gas mileage and lower emissions. Friction modifiers/anti wear agents offer engine protection from metal to metal contact and help them achieve those goals. The most common anti wear agent is ZDDP (zinc dialkyl dithiophosphate) or zinc and phosphorous. The most common friction modifier is Moly (molybdenum disulphide). The problem exists when the one additive that is best for a motorcycle (ZDDP) is bad for cars, and they other additive that is good for cars (Moly) is bad for motorcycles. Moly is a friction modifier used to raise gas mileage in cars. You can tell if oil has Moly in it by looking at the API (American Petroleum Institute) donut on the back. In the lower half of the circle it will say energy conserving. The problem with Moly is that most motorcycles have wet clutches, which means the clutches use the same oil as the motor. Moly will adhere to your clutch plates and cause clutch slippage

    .7OZ Radiator Stop Leak

    .7OZ Radiator Stop Leak
  • GOLD EAGLE CO
  • 75 x 75 inches
  • 0.1 pounds
  • Price: $2.70
    • ALUMASEAL" RADIATOR SEALANT
    Inhibits rust
    Lubricates water pump
    Quick permanent seal
    Compatible w/all antifreeze including extended life coolants
    .7OZ Radiator Stop Leak
    Buy .7OZ Radiator Stop Leak from Amazon
    .7 OZ, Alumaseal Radiator Stop Leak, Stops Leaks Safely, Quickly & Easily, Compatible With All Antifreeze, Safe For All Types Of Radiators, Treats Up To 22 QT Systems.

    7th Gear - 4 Stroke - Fuel System Cleaner - 1 Full Case = 12 Pints

    7th Gear - 4 Stroke - Fuel System Cleaner - 1 Full Case = 12 Pints
  • 7th Gear
  • 75 x 36 inches
  • Price: $57.70
    • Cleans carburetor, fuel injector, intake valve & combustion chamber desposits; reduces existing deposits
    Smoother accelerations and idle: reduces tendency to stall
    Restores power and acceleration
    Reduces valve sticking in cold weather
    For maximum benefit, use in a nearly empty fuel tank and do not refuel until tank is nearly empty
    7th Gear - 4 Stroke - Fuel System Cleaner - 1 Full Case = 12 Pints
    Buy 7th Gear - 4 Stroke - Fuel System Cleaner - 1 Full Case = 12 Pints from Amazon
    7th Gear products are specifically formulated for the powersports industry. Most of the automotive oils out in the market are designed to fulfill a much different set of criteria. Those criteria are not in the best interest of your high performance powersports engine. Automotive manufacturers dictate to the oil industry, their needs and then have the oil companies formulate products to meet those needs. Two of the most important needs are higher gas mileage and lower emissions. Friction modifiers/anti wear agents offer engine protection from metal to metal contact and help them achieve those goals. The most common anti wear agent is ZDDP (zinc dialkyl dithiophosphate) or zinc and phosphorous. The most common friction modifier is Moly (molybdenum disulphide). The problem exists when the one additive that is best for a motorcycle (ZDDP) is bad for cars, and they other additive that is good for cars (Moly) is bad for motorcycles. Moly is a friction modifier used to raise gas mileage in cars. You can tell if oil has Moly in it by looking at the API (American Petroleum Institute) donut on the back. In the lower half of the circle it will say energy conserving. The problem with Moly is that most motorcycles have wet clutches, which means the clutches use the same oil as the motor. Moly will adhere to your clutch plates and cause clutch slippage.

    ARMOR ALL 00131 TREATMNT GAS STP 8OZ (PACK OF 12)

    00131
  • 00131
  • ARMOR ALL 00131
  • 75 x 33 inches
  • Price: $16.99
    • Cleans carburetor and fuel injectors
    Reduce intake valve deposits
    Fights rust and saves gas
    Removes water to fight gasoline freeze
    8 oz.
    ARMOR ALL 00131 TREATMNT GAS STP 8OZ (PACK OF 12)
    Buy ARMOR ALL 00131 TREATMNT GAS STP 8OZ (PACK OF 12) from Amazon
    'STP' GAS TREATMENT Cleans carburetor and fuel injectors Reduce intake valve deposits Fights rust and saves gas Removes water to fight gasoline freeze 8 oz.

    ACE MOTOR OIL SAE 5W30 SH/CD

    86916A
  • 86916A
  • OLYMPIC OIL LTD
  • 75 x 41 inches
  • 24 pounds
  • List Price: $28.19
  • Price: $33.48
    • SAE 5W30 SH/CD
    Qt.
    For passenger car & diesel
    engines specifying API
    service SM
    ACE MOTOR OIL SAE 5W30 SH/CD
    Buy ACE MOTOR OIL SAE 5W30 SH/CD from Amazon
    'ACE' MOTOR OIL SAE 5W30 SH/CD Qt. For passenger car & diesel engines specifying API service SM Meets manufacturers warranty requirements Discovery CON, NBR, SUP

    Bar's Leaks Cooling System Sealer (5.5 oz.)

    Bar's Leaks Cooling System Sealer (5.5 oz.)
  • Bar's
  • 75 x 42 inches
  • Price: $2.99
    • Bar's Leaks Cooling System Sealer (5.5 oz.)
    Buy Bar's Leaks Cooling System Sealer (5.5 oz.) from Amazon
    Bar's Leaks Cooling System Sealer permanently seals leaks in plastic, aluminum, and metal radiators, heater cores, blocks, heads, gaskets, and freeze plugs. Prevents rust, cuts electrolysis, and lubes water pump. Compatible with all brands of antifreeze including extended life. Use one bottle for 4 cylinder engines and two bottles for 6 and 8 cylinder engines.

    85+ Gallon

    85+ Gallon
  • Red Line
  • 31 x 75 inches
  • Price: $7.95
    • Diesel Fuel Additive
    85+ Gallon
    Buy 85+ Gallon from Amazon
    Contains Extremely Powerful Lubricants, Detergents, Seal Conditioners, Fuel Stabilizers And Rust Preventatives, But Without Smoke Suppressant.

    8oz Dri Wash 'n Guard PolyGuard-1 Engine Oil Treatment

    8oz Dri Wash 'n Guard PolyGuard-1 Engine Oil Treatment
  • DWG International
  • 75 x 38 inches
  • 0.6 pounds
  • List Price: $16.95
  • Price: $16.95
    • DRI WASH 'n GUARD Engine Oil Treatment
    Helps keep your engine running smoother
    Reduces wear and heat generation
    Increases fuel mileage
    8oz Dri Wash 'n Guard PolyGuard-1 Engine Oil Treatment
    Buy 8oz Dri Wash 'n Guard PolyGuard-1 Engine Oil Treatment from Amazon
    Dri Wash 'n Guard® PolyGuard-1 Engine Oil Treatment is a highly concentrated conditioner that helps improve the natural lubricating qualities of motor oil. By adding film strength to oil, it forms a protective barrier between moving metal parts to reduce friction and wear. Dri Wash 'n Guard PolyGuard-1 Engine Oil Treatment helps make cold weather starts easier. Its anti-rust and anti-corrosive properties may help extend engine life and reduce oil consumption.

    Bar's Leaks Heavy Duty Cooling System Sealer (60 grams - tablets)

    Bar's Leaks Heavy Duty Cooling System Sealer (60 grams - tablets)
  • Bar's
  • 75 x 55 inches
  • Price: $2.99
    • Bar's Leaks Heavy Duty Cooling System Sealer (60 grams - tablets)
    Buy Bar's Leaks Heavy Duty Cooling System Sealer (60 grams - tablets) from Amazon
    Bar's Leaks Heavy Duty Cooling System Sealer permanently seals leaks in plastic, aluminum, and metal radiators, heater cores, blocks, heads, gaskets, and freeze plugs. Prevents rust, cuts electrolysis, and lubes water pump. Compatible with all brands of antifreeze including extended life. Use two 10 gram tablets for each gallon of coolant.

    3M(TM) Fuel System Cleaner Tank Additive 16 fl. oz. bottle

    3M(TM) Fuel System Cleaner Tank Additive 16 fl. oz. bottle
  • 3M
  • 8.89 x 75 x 36 inches
  • 2 pounds
  • List Price: $19.48
  • Price: $6.47
    • 3M(TM) Fuel System Cleaner Tank Additive 16 fl. oz. bottle
    Buy 3M(TM) Fuel System Cleaner Tank Additive 16 fl. oz. bottle from Amazon
    Designed to clean intake valves and cumbustion chambers and remove fuel injector deposits during the time it takes to consume one tank of gas. Protects against carbon buildup and engine knock.
    1 2 3 4 5 6 7 8 9 10 11 12 |13| 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 >>
    Copyright © 2008 24autopartsforall.com All right reserved