| Back Seat Heat Model 4000 (24 Volt Only) |  | Therm Technology Corp.75 x 68 inchesList Price: $200.00Price: $179.95 | For SUVs, vans, boats, RVs, tractors and equipment cabs, New patented energy cell, Instant heat output
Adjustable thermostat, Fan only and heat settings, Dashboard switch, 20 Ft. universal bracket
Cabinet remains cool to touch, Compact Design, Keeps vehicle warm and dry, Directional air flow, Lightweight, easy to install, portable
Voltage: 24 VDC, Current: 25 AMP @ 24 VDC, Power Consumption: 600 Watts, 2100 BTUs, Wire Harness Length: 20 ft., Fan Rating: 102 CFM |
|   | | Buy Back Seat Heat Model 4000 (24 Volt Only) from Amazon | | Install this Cab Heater in Large Construction Vehicles to Take Off the Chill Roadworthy 24 Volt BackSeat Heater provides i nstant warmth for cold areas in autos, RVs, vans, boats, trailers, truck cabs - virtually any 24 Volt vehicle - with over 2100 BTU's of heat. Powered by the vehicle's battery, the Back Seat Heat 4000 is easily installed and easily mounted in different locations or vehicles. Outer housing stays cool during use. Ignition block allows operation only when engine is running. Unique cell design: 100% efficient heat transfer to room air. Note: Not intended as primary heat source. Air output is 20° to 30° warmer than air input. Alternator must produce 45 to 40 amps for enough power to operate heater. Mount low, along floor, under elevated seats, on wheelwells, or on the floor. Start vehicle before turning on heater. Operate heater and fan ONLY if engine is running. Installation required. Included: wire, optional dash mounted switch and universal mounting bracket. Back Seat Heat Model 4000 (24 Volt Only) Specifications: Patent #4,9000,898 and 323,553 Voltage: 24V DC Current: 25 amp @24 VDC Power consumption: 600W, 2100 BTUs High temperature cut-out recycling limit switch Wire harness length: 20 ft Universal mounting bracket Auxiliary control: optional dashboard on/off switch Controls: off, fan only, heat Adjustable thermostat Fan rating: 102 CFM Assembled in USA Warranty: 2 years Dimensions: 5.25 in x 7.25 in x 8.25 in Weight: approx. 6 lbs |
|
| Back Seat Heat Plus 1100 BTU Heater, 12 Volt |  | Therm Technology Corp.75 x 59 inchesList Price: $150.00Price: $99.95 | |
| | | Buy Back Seat Heat Plus 1100 BTU Heater, 12 Volt from Amazon | | 12 volt auxiliary cab heaters 12 volt auxiliary cab heaters 12 Volt Auxiliary Cab Heaters Warm Cold Trucks or Vans Install the 12 Volt ceramic heater by Road Worthy if you need extra heat in the winter. This auxiliary heater produces 1100 BTU's of instant heat to warm cold areas in any 12 Volt vehicle. Weak heaters in vans, cars or truck cabs leave back seat occupants shivering. This back seat heater is powered by the vehicle's battery. Easy installation. Mount where you need it. Outer housing stays cool during use. Ignition Block:Back Seat Heater operates only when engine is running. Unique Cell Design: 100% efficient heat transfer to surrounding air. Note: Not intended to be primary heat source. Air output is 20° to 30° warmer than air input. For Heater Operation: Alternator must produce 45 to 40 amps. Mount: Low on floor, under elevated seats, on wheel wells. Start vehicle. Turn on heater. Engine MUST run to use heater and fan. Adjustable temperature control on unit. 12 Volts/300 watts/25 amps. Hard wire installation required. Included: necessary wiring, optional dash mounted switch and universal mounting bracket. Back Seat Heat Plus 1100 BTU Heater, 12 Volt Specifications: Voltage: 12V DC Current: 25 amp Power consumption 300W (1100 BTU) battery safe High temperature cut-out recycling limit switch Wire harness length 20 ft with in-line 30 amp fuse Wire connection: lower left of back of unit Universal mounting bracket Auxiliary control: Dashboard on/off switch Controls: Fan, Off, Heat Adjustable temperature control on unit Circular air intake (rear of unit: 4.5 inch circle) Front grill: 4.5 inches wide by 4.25 inches high Front heat output area: 2.75 x 2.75 inches Fan rating: 102 CFM Assembled in USA Dimensions: 5.25 in. x 7.25 in. x 8.25 in. Weight: approx. 6 lbs Warranty: 2 Years |
|
| BikeBatts 4WD 480-90 Diamond Grip Tire Chains for Passenger Cars, SUV's, and Light Trucks |  | 4WD 480-90-1HSI14 x 56 x 75 inches24 poundsList Price: $129.95Price: $62.95 | Diamond Grip chain pattern provides increased tire chain contact with the ground for superior tractions and control, decreased braking distance, smoother and quieter ride. Ideal for front wheel drive vehicles.
Perhaps the easiest tire chain to install. No need to get on the ground, or under the vehicle. No need to move or raise the vehicle. See photos below.
Designed to fit tire size: 750X16, 8.5X17.5, 7X19.5, 33X12.5X15, 33X12.5X15, 235/85R16, 255/70R16, 255/85R16, 265/75R16, 245/70R17,255/70R17, 275/40R17, 275/60R17 225/75x17.5
Quick Adjust utilizes a ratchet feature making it easy to properly adjust the tension and ensures a proper fit.. Quick connect/disconnect inner cable ring.
Orders entered before 2 p.m. PT ship the same day. Live Customer Service |
| | | Buy BikeBatts 4WD 480-90 Diamond Grip Tire Chains for Passenger Cars, SUV's, and Light Trucks from Amazon | | Designed to fit tire size: 750X16, 8.5X17.5, 7X19.5, 31x13.5x15, 33X12.5X15, 235/85R16, 255/70R16, 255/85R16, 265/75R16, 245/70R17,255/70R17, 275/40R17, 275/60R17 225/75x17.5. If you do not see your size call BikeBatts Customer Service toll free.
BikeBatts Diamond Grip Tire Chains are specially constructed for superior traction on snow and ice. The special Diamond grip pattern enables the tire chain to have more contact with the road surface, resulting in improved tractions and skid control, while reducing vibration and noise. Vibration reduction is very important for maximum vehicle control and comfort on front wheel drive vehicles.
BikeBatts Diamond Grip tire chains are constructed from 16 MM thick Square Steel Stock. Unlike tire chains made from round stock steel, the square corners on BikeBatts chain links provide gripping edges enabling the tire chains to grip into snow and ice.
BikeBatts Diamond Grip tire chains incorporate a clam shell design enabling the chains to be installed without trying to drive your vehicle onto the chains, or laying on the ground. |
|
| BikeBatts 4WD 410-60 Diamond Grip Tire Chains for Passenger Cars, SUV's, and Light Trucks | | 4WD 410-60-1HSI14 x 56 x 75 inches22 poundsList Price: $99.95Price: $57.95 | Diamond Grip chain pattern provides increased tire chain contact with the ground for superior tractions and control, decreased braking distance, smoother and quieter ride. Ideal for front wheel drive vehicles.
Perhaps the easiest tire chain to install. No need to get on the ground, or under the vehicle. No need to move or raise the vehicle. See photos below.
Fits tire size: 215X16, 225/75R15, 235/70R15, 235/75R15, 215/75R16, 215/85R16, 225/70R16, 225/75R16, 235/65R16, 235/75R16, 245/75R16, 225/60R17, 235/55R18. If you do not see your tire size call Customer Service toll fee at (888) 561-7100
Quick Adjust utilizes a ratchet feature making it easy to properly adjust the tension and ensures a proper fit. Quick connect/disconnect inner cable ring.
Orders entered before 2 p.m. PT ship the same day. Live Customer Service at BikeBatts |
| | | Buy BikeBatts 4WD 410-60 Diamond Grip Tire Chains for Passenger Cars, SUV's, and Light Trucks from Amazon | | Designed to fit: 215X16, 225/75R15, 235/70R15, 235/75R15, 215/75R16, 215/85R16, 225/70R16, 225/75R16, 235/65R16, 235/75R16, 245/75R16, 225/60R17, 235/55R18, 225/65R17 245/45R17, 255/45R18. If you do not see your size call BikeBatts Customer Service.
BikeBatts Diamond Grip Tire Chains are specially constructed for superior traction on snow and ice. The special Diamond grip pattern enables the tire chain to have more contact with the road surface, resulting in improved tractions and skid control, while reducing vibration and noise. Vibration reduction is very important for maximum vehicle control and comfort on front wheel drive vehicles.
BikeBatts Diamond Grip tire chains are constructed from 16 MM thick Square Steel Stock. Unlike tire chains made from round stock steel, the square corners on BikeBatts chain links provide gripping edges enabling the tire chains to grip into snow and ice.
BikeBatts Diamond Grip tire chains incorporate a clam shell design enabling the chains to be installed without trying to drive your vehicle onto the chains, or laying on the ground. |
|
| BikeBatts KN060 Diamond Grip Tire Chains for Passenger Cars, SUV's, and Light Trucks | | KN060-1HSI14 x 56 x 75 inches14 poundsList Price: $99.99Price: $39.95 | Diamond Grip chain pattern provides increased tire chain contact with the ground for superior tractions and control, decreased braking distance, smoother and quieter ride. Ideal for front wheel drive vehicles.
Perhaps the easiest tire chain to install. No need to get on the ground, or under the vehicle. No need to move or raise the vehicle. See photos below.
Fits tire sizes:175/65R14, 185/55R15, 185/65R14, 185/70R13, 195/50R15, 195/60R14, 195/60-365, 195/65R13, 205/60R13, 200/65-340 you do not see your tire size call Customer Service toll free at (888) 561-7100
Quick Adjust utilizes a ratchet feature making it easy to properly adjust the tension and ensures a proper fit. Quick connect/disconnect inner cable ring.
Orders entered before 2 p.m. PT ship the same day. Live Customer Service at BikeBatts |
| | | Buy BikeBatts KN060 Diamond Grip Tire Chains for Passenger Cars, SUV's, and Light Trucks from Amazon | | BikeBatts Diamond Grip Tire Chains are specially constructed for superior traction on snow and ice. The special Diamond grip pattern enables the tire chain to have more contact with the road surface, resulting in improved tractions and skid control, while reducing vibration and noise. Vibration reduction is very important for maximum vehicle control and comfort on front wheel drive vehicles.
BikeBatts Diamond Grip tire chains are constructed from 12 MM thick Square Steel Stock. Unlike tire chains made from round stock steel, the square corners on BikeBatts chain links provide gripping edges enabling the tire chains to grip into snow and ice.
BikeBatts Diamond Grip tire chains incorporate a clam shell design enabling the chains to be installed without trying to drive your vehicle onto the chains, or laying on the ground. |
|
| | | BikeBatts KN080 Diamond Grip Tire Chains for Passenger Cars, SUV's, and Light Trucks | | KN080-1HSI14 x 56 x 75 inches20 poundsList Price: $99.95Price: $44.95 | Diamond Grip chain pattern provides increased tire chain contact with the ground for superior tractions and control, decreased braking distance, smoother and quieter ride. Ideal for front wheel drive vehicles.
Perhaps the easiest tire chain to install. No need to get on the ground, or under the vehicle. No need to move or raise the vehicle. See photos below.
Fits tire size 175x15, 185x14, 185/70R14, 185/60R15, 185/70R15, 190/65-390, 195/65R15, 195/70R14, 200/60-390, 205/50R16, 205/60R15, 205/65R14, 205/70R13, 225/55R14, 200/60-390, 210/55-390, 210/65-365, 220/50-365. If you do not see your tire size call Customer Service toll free at (888) 561-7100
Quick Adjust utilizes a ratchet feature making it easy to properly adjust the tension and ensures a proper fit. Quick connect/disconnect inner cable ring.
Orders entered before 2 p.m. PT ship the same day.Live Customer Service At BikeBatts |
| | | Buy BikeBatts KN080 Diamond Grip Tire Chains for Passenger Cars, SUV's, and Light Trucks from Amazon | | Designed to fit 175-15, 185-14, 185/70R14, 185/70R15, 185/60R15, 190/65R15, 195/70R14,205/50R16, 205/60R15, 205/65R14, 205/70R13, 225/55R14, 190/65-390, 210/55-390. If you do not see your size call BikeBatts Customer Service toll free.
BikeBatts Diamond Grip Tire Chains are specially constructed for superior traction on snow and ice. The special Diamond grip pattern enables the tire chain to have more contact with the road surface, resulting in improved tractions and skid control, while reducing vibration and noise. Vibration reduction is very important for maximum vehicle control and comfort on front wheel drive vehicles.
BikeBatts Diamond Grip tire chains are constructed from 12 MM thick Square Steel Stock. Unlike tire chains made from round stock steel, the square corners on BikeBatts chain links provide gripping edges enabling the tire chains to grip into snow and ice.
BikeBatts Diamond Grip tire chains incorporate a clam shell design enabling the chains to be installed without trying to drive your vehicle onto the chains, or laying on the ground. |
|
| AutoSock Standard X10 Winter Traction Aid, For Passenger Tires |  | AutoSock X10AutoSock12.5 x 73 x 75 inches2.2 poundsList Price: $79.00Price: $79.00 | Easy-to-mount, self-centering alternative to tire chains
Comfortable while driving; does not cause noise or vibrations
Lightweight, easy-to-store, reusable, and machine washable
Each set comes with two AutoSocks, user manual, storage bag, and gloves
Only one set per vehicle required, even for AWD and 4WD applications |
| | | Buy AutoSock Standard X10 Winter Traction Aid, For Passenger Tires from Amazon | | Unexpected winter weather can create driving conditions demanding more traction than conventional tires -- or even snow treads -- can provide. But tire chains are bulky to store and can be difficult to put on in cold, snowy weather. Now there is an easy-to-use alternative to chains: Designed in Norway, AutoSock is a new and innovative lightweight fabric-based, temporary traction aid for cars and trucks that is easy to mount and gets a grip on slippery surfaces as snow and ice. AutoSock, a high-technology textile tire covering, utilizes specially patterned fibers that optimize grip on slick surfaces by managing the thin layer of water on top of ice and snow. Through its weaving pattern and thousands of small fibers AutoSock clings to snow and ice, increasing vehicle traction, improving safety and adding to driver confidence. With AutoSock, you won't experience the rattles and bumpy ride associated with tire chains, and it is approved for speeds up to 30 mph. AutoSock is easy to install following these simple steps: Stop the vehicle and apply the emergency brake, fit AutoSock to the drive wheels of the vehicle, starting at the top of the tire and working downwards. Then, stretch the elastic band over the top of the tire to the inside of the tire, tighten the crossing strap, and move the vehicle approximately 3 feet and pull the remainder of the AutoSock into position. AutoSock automatically self-centers when you begin driving. When you're back on snow-free roads, slip the AutoSock off and slip it back into the included storage bag. After use, AutoSock should be put back in the storage bag until the destination is reached. Then they can be machine-washed and put back in the bag, ready to go for the next snow or ice storm. Note: AutoSock is not meant for severe snow conditions, and cannot be substituted for chains for travel through mountain passes. The standard AutoSock accommodates non-performance tire sizes (typically OEM sizes for economy passenger vehicles). For performance tires, try AutoSock High Performance. |
|
|
|
