Alfred Hitch Cover 10014 Hitch Cover UNC Tar Heels

Valley 30112 Wiring T-Connector

Champion Hitch Receiver Bracket with Shackle - 9,500 Lb Pull Capacity

Alfred Hitch Cover Florida Gators Tailgater Cover

Hopkins 48165 24" 4-Wire Flat Connector Kit

Hopkins Plug-In Simple 47435 6 Round To 7 RV Blade Adapter

87424 Hidden Hitch Class 3 and 4 Trailer Receiver Hitch fits Jeep Wrangler, Jeep Wrangler Unlimited, Jeep Wrangler Unlimited

Cequent Class 3/4 Trailer Hitch
Part # 87424 

Fits

Cequent is the Parent company of Reese, Draw-Tite, and Hidden Hitch. All manufactured in one facility.

• Class III hitches are weight carrying (WC) and also are weight distributing (WD) depending on the vehicle and hitch specifications.
• Not all Class III hitches are rated to be both. See the specific hitch for that information.
• Class III hitches used as weight carrying are rated up to 6000 lbs. gross trailer weight (GTW) with a maximum trailer tongue weight (TW) of 600 lbs.
• Class III hitches used for weight distributing are rated up to 10,000 lbs. gross trailer weight (GTW) with a maximum trailer tongue weight (TW) of 1000 lbs.
• A Class III hitch usually has a 2' square receiver opening.
• A higher class drawbar does not increase the towing capacity of the hitch. To use this class of hitch for weight distribution requires a weight distribution system.
• Class III hitches attach to the vehicle frame only.

Class III/IV hitches are Weight Carrying (WC) and also are Weight Distributing (WD) hitches depending on the vehicle and hitch specifications. Not all Class III/IV hitches are rated to be both. The hitch specifications will alert you to a hitch that is not weight distributing. Class III/IV hitches used as Weight Carrying is rated up to 6,000 lbs. Gross Trailer Weight (GTW) with a maximum trailer Tongue Weight (TW) of 600 lbs. The use of a ball mount and hitch ball of the same rating or higher is required. To use the weight distribution side of the hitch a weight distribution system is required. Class III/IV hitches attach to the vehicle frame only. Always consult your owner's manual for vehicle rating.

Help determining Gross Trailer Weight & Tongue Weight

• In

CT11180 Curt Class 1 Trailer Receiver Hitch fits Audi A4 Avant

Curt Class 1 Trailer Hitch
Part # CT11180 

Fits

• Class I tow hitches are weight carrying (WC) hitches rated up to 2000 lbs. gross trailer weight (GTW) with a maximum trailer tongue weight (TW) of 200 lbs.
• A Class I hitch usually has a 1-1/4' square receiver opening.
• A higher class drawbar does not increase the towing capacity of the hitch.
• Class I hitches usually attach to the bumper, trunk pan or vehicle frame.

Class I hitches have the lowest weight carrying gross trailer weight capacity (WCGTW) rating and tongue weight (WCTW) of the hitch classes and are generally used for small trailers carrying a motorcycle, snowmobile, ATV or Personal Watercraft or small 'pop-up' style campers or small 'U-Haul' style trailers.

Class I hitches usually have a 1-1/4' square receiver opening and attach to your vehicle bumper, truck pan or frame.

Each vehicle, hitch, drawbar and ballmount have their own weight capacity ratings. Never tow more than the lowest capacity allowed for any of these components. Always consult your owner's manual for vehicle rating and hitch, drawbar and hitchbal

Trimax TG3048SX Supermax Security Armor Plated Stainless Steel Locking Cable (48" length x 26mm)

NC Tarheels Hitch Cover