|
|
|
OKOffroad OK-SHI034 3/4 in. Screw Pin D-Ring Shackle (Imported) |  | OKOffroad75 x 75 inchesPrice: $14.90 | |
|   | | Buy OKOffroad OK-SHI034 3/4 in. Screw Pin D-Ring Shackle (Imported) from Amazon | | 3/4 in. Screw Pin D-Ring Shackle 7/8 in. Pin Size - IMPORTED Our imported D-Ring Shackle is hot-dipped galvanized, with working load limits equal to U.S. made shackles. 9,500 lb Working Load Limit 47,500 lb Ultimate Strength 7/8 in. Pin Diameter Working Load Limit permanently shown on every shackle Forged - Quenched and Tempered, with alloy pin. Same working load limits as U.S. made product |
|
|
Hidden Hitch 87001 Class III Hitch |  | 87001Hidden Hitch46 x 35 x 75 inches39 poundsList Price: $235.53Price: $143.32 | Reduces cutting of bumper and drilling
Supports up to 3,500 pounds of maximum Gross Trailer Weight (G.T.W) and 350 pounds of maximum Tongue Weight (T.W.)
Inspected for quality and workmanship
Features a rust resistant black powder coating
Provides an outstanding rust resistant appearance for years with a limited lifetime warranty |
| | | Buy Hidden Hitch 87001 Class III Hitch from Amazon | Cequent Class 3/4 Trailer Hitch
Part # 87001 Fits
1976-1986 Jeep CJ-5
1976-1986 Jeep CJ-7
1981-1986 Jeep Scrambler
Cequent is the Parent company of Reese, Draw-Tite, and Hidden Hitch. All manufactured in one facility. - Class III hitches are weight carrying (WC) and also are weight distributing (WD) depending on the vehicle and hitch specifications.
- Not all Class III hitches are rated to be both. See the specific hitch for that information.
- Class III hitches used as weight carrying are rated up to 6000 lbs. gross trailer weight (GTW) with a maximum trailer tongue weight (TW) of 600 lbs.
- Class III hitches used for weight distributing are rated up to 10,000 lbs. gross trailer weight (GTW) with a maximum trailer tongue weight (TW) of 1000 lbs.
- A Class III hitch usually has a 2' square receiver opening.
- A higher class drawbar does not increase the towing capacity of the hitch. To use this class of hitch for weight distribution requires a weight distribution system.
- Class III hitches attach to the vehicle frame only.
Class III/IV hitches are Weight Carrying (WC) and also are Weight Distributing (WD) hitches depending on the vehicle and hitch specifications. Not all Class III/IV hitches are rated to be both. The hitch specifications will alert you to a hitch that is not weight distributing. Class III/IV hitches used as Weight Carrying is rated up to 6,000 lbs. Gross Trailer Weight (GTW) with a maximum trailer Tongue Weight (TW) of 600 lbs. The use of a ball mount and hitch ball of the same rating or higher is required. To use the weight distribution side of the hitch a weight distribution system is required. Class III/IV hitches attach to the vehicle frame only. Always consult your owner's manual for vehicle rating.
Help determining Gross Trailer Weight & Tongue Weight |
|
|
|
Hidden Hitch 80305 Receiver Extension |  | 80305Hidden Hitch18 x 75 x 75 inches14 poundsList Price: $58.66Price: $29.65 | Features E-coated black powder finish
Adaptor for 2" receiver that stays a 2" receiver and extends to 14"
Have 3500 pounds gross trailer weight rating
The adaptors do not exceed the weight limits of the hitch
Adapters are made from highest quality steel |
| | | Buy Hidden Hitch 80305 Receiver Extension from Amazon | Cequent Receiver Extension
Part # 80305 Cequent is the Parent company of Reese, Draw-Tite, and Hidden Hitch. All manufactured in one facility. The Hitch Box Extension is ideal for slide-out campers with extended overhangs. - The limiting factor is the capacity of your hitch. Using a hitch extender will reduce your hitch's overall capacity by 1/2.
Specs| Fits | 2 inch Receiver | | GTW | 3,500 | | Length | 14 inch |
Features- For use with 2 inch receivers only.
Not Included |
|
|
|
|
|
