Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Silverado 2007 to 2008 (NewBody) 2WD & 4WD |  | Maxloader60 x 32 x 75 inches80 poundsList Price: $449.00Price: $399.00 | Additional Support: The Maxloader Spring Support Systems provides additional spring support to your truck or SUV. The Maxloader was designed to assist the factory leaf springs when they compress down onto the helper springs, eliminating pre-tensioning and a constatly stiff ride.
Better Handling/ Control: The Maxloader's design allows for better handling and control while carrying heavy loads. This spring system was designed to provide factory handling and control regardless of what size load your vehicle is carrying. (Always stay within your vehicle's rated GVW load limits.)
Less Sway: The full length design of the Maxloader System allows it to act like an anti-sway bar. It helps prevent rolling and swaying characteristics that often occur when a vehicle becomes too overloaded for the factory suspension.
Level Loads: Maintain a factory ride height and level loads with a Maxloader System. The rear of the vehicle will sit level, eliminating front end lift and un-natural steering tendencies.
Factory Ride: The Maxloader Springs allow your vehicle to maintain a factory ride. While empty, only the factory springs will be working, ensuring a plush and comfortable ride. When the vehicle is loaded, the Maxloader springs begin to interact with the factory springs to provide additional support and level suspension travel. |
|   | | Buy Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Silverado 2007 to 2008 (NewBody) 2WD & 4WD from Amazon | | The engineers at Maxloader believe that the customer does not have the time nor the money to invest in a spring system that will eventually fail. To overcome this, the Maxloader Spring Support System was introduced as being both cost effective and safe for the user. The Maxloader System is easy to install, safe for all operations, and will never wear out. The Maxloader installs between the axle and your factory leaf springs. Unlike other systems that mount above the leaf spring and always work against the factory springs, the Maxloader Spring Supports only provide additional support when the factory springs are loaded. This allows for a plush, factory ride during daily commutes, while providing increased support and stability when hauling and/or towing heavy loads. The below the spring mount is designed to only engage when needed and eliminates any pre-tensioning allowing for a factory ride empty or full. The Maxloader springs are as long as your factory leaf springs, providing support to the factory leafs at three key points; both spring ends and in the center mounting location. This ensures an evenly distributed load and prevents fatiguing stress that other systems exhibit and eventually cause broken leaf springs. This unique design is also very effective at eliminating swaying and rolling characteristics, especially in corners. Installation is easy and and can be quickly accomplished with only a few bolts; no clamps, drilling, or air system components. The end result of a Maxloader Spring Support System is a vehicle that rides smoother and more level, with evenly distributed weight resulting in less strain to the drivetrain and suspension components. All Maxloader Systems are backed by a Lifetime Warranty. |
|
| Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Silverado 1500 2000 to 2007 (ClassicBody) 1500HD | | Maxloader60 x 32 x 75 inches80 poundsList Price: $449.00Price: $399.00 | Additional Support: The Maxloader Spring Support Systems provides additional spring support to your truck or SUV. The Maxloader was designed to assist the factory leaf springs when they compress down onto the helper springs, eliminating pre-tensioning and a constatly stiff ride.
Better Handling/ Control: The Maxloader's design allows for better handling and control while carrying heavy loads. This spring system was designed to provide factory handling and control regardless of what size load your vehicle is carrying. (Always stay within your vehicle's rated GVW load limits.)
Less Sway: The full length design of the Maxloader System allows it to act like an anti-sway bar. It helps prevent rolling and swaying characteristics that often occur when a vehicle becomes too overloaded for the factory suspension.
Level Loads: Maintain a factory ride height and level loads with a Maxloader System. The rear of the vehicle will sit level, eliminating front end lift and un-natural steering tendencies.
Factory Ride: The Maxloader Springs allow your vehicle to maintain a factory ride. While empty, only the factory springs will be working, ensuring a plush and comfortable ride. When the vehicle is loaded, the Maxloader springs begin to interact with the factory springs to provide additional support and level suspension travel. |
| | | Buy Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Silverado 1500 2000 to 2007 (ClassicBody) 1500HD from Amazon | | The engineers at Maxloader believe that the customer does not have the time nor the money to invest in a spring system that will eventually fail. To overcome this, the Maxloader Spring Support System was introduced as being both cost effective and safe for the user. The Maxloader System is easy to install, safe for all operations, and will never wear out. The Maxloader installs between the axle and your factory leaf springs. Unlike other systems that mount above the leaf spring and always work against the factory springs, the Maxloader Spring Supports only provide additional support when the factory springs are loaded. This allows for a plush, factory ride during daily commutes, while providing increased support and stability when hauling and/or towing heavy loads. The below the spring mount is designed to only engage when needed and eliminates any pre-tensioning allowing for a factory ride empty or full. The Maxloader springs are as long as your factory leaf springs, providing support to the factory leafs at three key points; both spring ends and in the center mounting location. This ensures an evenly distributed load and prevents fatiguing stress that other systems exhibit and eventually cause broken leaf springs. This unique design is also very effective at eliminating swaying and rolling characteristics, especially in corners. Installation is easy and and can be quickly accomplished with only a few bolts; no clamps, drilling, or air system components. The end result of a Maxloader Spring Support System is a vehicle that rides smoother and more level, with evenly distributed weight resulting in less strain to the drivetrain and suspension components. All Maxloader Systems are backed by a Lifetime Warranty. |
|
| Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Silverado 1999 to 2007 (ClassicBody) 2WD & 4WD | | Maxloader60 x 32 x 75 inches80 poundsList Price: $449.00Price: $399.00 | Additional Support: The Maxloader Spring Support Systems provides additional spring support to your truck or SUV. The Maxloader was designed to assist the factory leaf springs when they compress down onto the helper springs, eliminating pre-tensioning and a constatly stiff ride.
Better Handling/ Control: The Maxloader's design allows for better handling and control while carrying heavy loads. This spring system was designed to provide factory handling and control regardless of what size load your vehicle is carrying. (Always stay within your vehicle's rated GVW load limits.)
Less Sway: The full length design of the Maxloader System allows it to act like an anti-sway bar. It helps prevent rolling and swaying characteristics that often occur when a vehicle becomes too overloaded for the factory suspension.
Level Loads: Maintain a factory ride height and level loads with a Maxloader System. The rear of the vehicle will sit level, eliminating front end lift and un-natural steering tendencies.
Factory Ride: The Maxloader Springs allow your vehicle to maintain a factory ride. While empty, only the factory springs will be working, ensuring a plush and comfortable ride. When the vehicle is loaded, the Maxloader springs begin to interact with the factory springs to provide additional support and level suspension travel. |
| | | Buy Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Silverado 1999 to 2007 (ClassicBody) 2WD & 4WD from Amazon | | The engineers at Maxloader believe that the customer does not have the time nor the money to invest in a spring system that will eventually fail. To overcome this, the Maxloader Spring Support System was introduced as being both cost effective and safe for the user. The Maxloader System is easy to install, safe for all operations, and will never wear out. The Maxloader installs between the axle and your factory leaf springs. Unlike other systems that mount above the leaf spring and always work against the factory springs, the Maxloader Spring Supports only provide additional support when the factory springs are loaded. This allows for a plush, factory ride during daily commutes, while providing increased support and stability when hauling and/or towing heavy loads. The below the spring mount is designed to only engage when needed and eliminates any pre-tensioning allowing for a factory ride empty or full. The Maxloader springs are as long as your factory leaf springs, providing support to the factory leafs at three key points; both spring ends and in the center mounting location. This ensures an evenly distributed load and prevents fatiguing stress that other systems exhibit and eventually cause broken leaf springs. This unique design is also very effective at eliminating swaying and rolling characteristics, especially in corners. Installation is easy and and can be quickly accomplished with only a few bolts; no clamps, drilling, or air system components. The end result of a Maxloader Spring Support System is a vehicle that rides smoother and more level, with evenly distributed weight resulting in less strain to the drivetrain and suspension components. All Maxloader Systems are backed by a Lifetime Warranty. |
|
| Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Van Full Size 1996 to 2008 W/ Multi-Leaf Spring | | Maxloader60 x 32 x 75 inches80 poundsList Price: $449.00Price: $399.00 | Additional Support: The Maxloader Spring Support Systems provides additional spring support to your truck or SUV. The Maxloader was designed to assist the factory leaf springs when they compress down onto the helper springs, eliminating pre-tensioning and a constatly stiff ride.
Better Handling/ Control: The Maxloader's design allows for better handling and control while carrying heavy loads. This spring system was designed to provide factory handling and control regardless of what size load your vehicle is carrying. (Always stay within your vehicle's rated GVW load limits.)
Less Sway: The full length design of the Maxloader System allows it to act like an anti-sway bar. It helps prevent rolling and swaying characteristics that often occur when a vehicle becomes too overloaded for the factory suspension.
Level Loads: Maintain a factory ride height and level loads with a Maxloader System. The rear of the vehicle will sit level, eliminating front end lift and un-natural steering tendencies.
Factory Ride: The Maxloader Springs allow your vehicle to maintain a factory ride. While empty, only the factory springs will be working, ensuring a plush and comfortable ride. When the vehicle is loaded, the Maxloader springs begin to interact with the factory springs to provide additional support and level suspension travel. |
| | | Buy Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Van Full Size 1996 to 2008 W/ Multi-Leaf Spring from Amazon | | The engineers at Maxloader believe that the customer does not have the time nor the money to invest in a spring system that will eventually fail. To overcome this, the Maxloader Spring Support System was introduced as being both cost effective and safe for the user. The Maxloader System is easy to install, safe for all operations, and will never wear out. The Maxloader installs between the axle and your factory leaf springs. Unlike other systems that mount above the leaf spring and always work against the factory springs, the Maxloader Spring Supports only provide additional support when the factory springs are loaded. This allows for a plush, factory ride during daily commutes, while providing increased support and stability when hauling and/or towing heavy loads. The below the spring mount is designed to only engage when needed and eliminates any pre-tensioning allowing for a factory ride empty or full. The Maxloader springs are as long as your factory leaf springs, providing support to the factory leafs at three key points; both spring ends and in the center mounting location. This ensures an evenly distributed load and prevents fatiguing stress that other systems exhibit and eventually cause broken leaf springs. This unique design is also very effective at eliminating swaying and rolling characteristics, especially in corners. Installation is easy and and can be quickly accomplished with only a few bolts; no clamps, drilling, or air system components. The end result of a Maxloader Spring Support System is a vehicle that rides smoother and more level, with evenly distributed weight resulting in less strain to the drivetrain and suspension components. All Maxloader Systems are backed by a Lifetime Warranty. |
|
| Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Van Full Size 1996 to 2008 | | Maxloader60 x 32 x 75 inches80 poundsList Price: $449.00Price: $399.00 | Additional Support: The Maxloader Spring Support Systems provides additional spring support to your truck or SUV. The Maxloader was designed to assist the factory leaf springs when they compress down onto the helper springs, eliminating pre-tensioning and a constatly stiff ride.
Better Handling/ Control: The Maxloader's design allows for better handling and control while carrying heavy loads. This spring system was designed to provide factory handling and control regardless of what size load your vehicle is carrying. (Always stay within your vehicle's rated GVW load limits.)
Less Sway: The full length design of the Maxloader System allows it to act like an anti-sway bar. It helps prevent rolling and swaying characteristics that often occur when a vehicle becomes too overloaded for the factory suspension.
Level Loads: Maintain a factory ride height and level loads with a Maxloader System. The rear of the vehicle will sit level, eliminating front end lift and un-natural steering tendencies.
Factory Ride: The Maxloader Springs allow your vehicle to maintain a factory ride. While empty, only the factory springs will be working, ensuring a plush and comfortable ride. When the vehicle is loaded, the Maxloader springs begin to interact with the factory springs to provide additional support and level suspension travel. |
| | | Buy Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Van Full Size 1996 to 2008 from Amazon | | The engineers at Maxloader believe that the customer does not have the time nor the money to invest in a spring system that will eventually fail. To overcome this, the Maxloader Spring Support System was introduced as being both cost effective and safe for the user. The Maxloader System is easy to install, safe for all operations, and will never wear out. The Maxloader installs between the axle and your factory leaf springs. Unlike other systems that mount above the leaf spring and always work against the factory springs, the Maxloader Spring Supports only provide additional support when the factory springs are loaded. This allows for a plush, factory ride during daily commutes, while providing increased support and stability when hauling and/or towing heavy loads. The below the spring mount is designed to only engage when needed and eliminates any pre-tensioning allowing for a factory ride empty or full. The Maxloader springs are as long as your factory leaf springs, providing support to the factory leafs at three key points; both spring ends and in the center mounting location. This ensures an evenly distributed load and prevents fatiguing stress that other systems exhibit and eventually cause broken leaf springs. This unique design is also very effective at eliminating swaying and rolling characteristics, especially in corners. Installation is easy and and can be quickly accomplished with only a few bolts; no clamps, drilling, or air system components. The end result of a Maxloader Spring Support System is a vehicle that rides smoother and more level, with evenly distributed weight resulting in less strain to the drivetrain and suspension components. All Maxloader Systems are backed by a Lifetime Warranty. |
|
| Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Dodge Dakota 1986 to 2004 2WD | | Maxloader60 x 32 x 75 inches80 poundsList Price: $449.00Price: $399.00 | Additional Support: The Maxloader Spring Support Systems provides additional spring support to your truck or SUV. The Maxloader was designed to assist the factory leaf springs when they compress down onto the helper springs, eliminating pre-tensioning and a constatly stiff ride.
Better Handling/ Control: The Maxloader's design allows for better handling and control while carrying heavy loads. This spring system was designed to provide factory handling and control regardless of what size load your vehicle is carrying. (Always stay within your vehicle's rated GVW load limits.)
Less Sway: The full length design of the Maxloader System allows it to act like an anti-sway bar. It helps prevent rolling and swaying characteristics that often occur when a vehicle becomes too overloaded for the factory suspension.
Level Loads: Maintain a factory ride height and level loads with a Maxloader System. The rear of the vehicle will sit level, eliminating front end lift and un-natural steering tendencies.
Factory Ride: The Maxloader Springs allow your vehicle to maintain a factory ride. While empty, only the factory springs will be working, ensuring a plush and comfortable ride. When the vehicle is loaded, the Maxloader springs begin to interact with the factory springs to provide additional support and level suspension travel. |
| | | Buy Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Dodge Dakota 1986 to 2004 2WD from Amazon | | The engineers at Maxloader believe that the customer does not have the time nor the money to invest in a spring system that will eventually fail. To overcome this, the Maxloader Spring Support System was introduced as being both cost effective and safe for the user. The Maxloader System is easy to install, safe for all operations, and will never wear out. The Maxloader installs between the axle and your factory leaf springs. Unlike other systems that mount above the leaf spring and always work against the factory springs, the Maxloader Spring Supports only provide additional support when the factory springs are loaded. This allows for a plush, factory ride during daily commutes, while providing increased support and stability when hauling and/or towing heavy loads. The below the spring mount is designed to only engage when needed and eliminates any pre-tensioning allowing for a factory ride empty or full. The Maxloader springs are as long as your factory leaf springs, providing support to the factory leafs at three key points; both spring ends and in the center mounting location. This ensures an evenly distributed load and prevents fatiguing stress that other systems exhibit and eventually cause broken leaf springs. This unique design is also very effective at eliminating swaying and rolling characteristics, especially in corners. Installation is easy and and can be quickly accomplished with only a few bolts; no clamps, drilling, or air system components. The end result of a Maxloader Spring Support System is a vehicle that rides smoother and more level, with evenly distributed weight resulting in less strain to the drivetrain and suspension components. All Maxloader Systems are backed by a Lifetime Warranty. |
|
| Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Suburban 1992 to 2008 W/ Steel Leaf Springs | | Maxloader60 x 32 x 75 inches80 poundsList Price: $449.00Price: $399.00 | Additional Support: The Maxloader Spring Support Systems provides additional spring support to your truck or SUV. The Maxloader was designed to assist the factory leaf springs when they compress down onto the helper springs, eliminating pre-tensioning and a constatly stiff ride.
Better Handling/ Control: The Maxloader's design allows for better handling and control while carrying heavy loads. This spring system was designed to provide factory handling and control regardless of what size load your vehicle is carrying. (Always stay within your vehicle's rated GVW load limits.)
Less Sway: The full length design of the Maxloader System allows it to act like an anti-sway bar. It helps prevent rolling and swaying characteristics that often occur when a vehicle becomes too overloaded for the factory suspension.
Level Loads: Maintain a factory ride height and level loads with a Maxloader System. The rear of the vehicle will sit level, eliminating front end lift and un-natural steering tendencies.
Factory Ride: The Maxloader Springs allow your vehicle to maintain a factory ride. While empty, only the factory springs will be working, ensuring a plush and comfortable ride. When the vehicle is loaded, the Maxloader springs begin to interact with the factory springs to provide additional support and level suspension travel. |
| | | Buy Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Suburban 1992 to 2008 W/ Steel Leaf Springs from Amazon | | The engineers at Maxloader believe that the customer does not have the time nor the money to invest in a spring system that will eventually fail. To overcome this, the Maxloader Spring Support System was introduced as being both cost effective and safe for the user. The Maxloader System is easy to install, safe for all operations, and will never wear out. The Maxloader installs between the axle and your factory leaf springs. Unlike other systems that mount above the leaf spring and always work against the factory springs, the Maxloader Spring Supports only provide additional support when the factory springs are loaded. This allows for a plush, factory ride during daily commutes, while providing increased support and stability when hauling and/or towing heavy loads. The below the spring mount is designed to only engage when needed and eliminates any pre-tensioning allowing for a factory ride empty or full. The Maxloader springs are as long as your factory leaf springs, providing support to the factory leafs at three key points; both spring ends and in the center mounting location. This ensures an evenly distributed load and prevents fatiguing stress that other systems exhibit and eventually cause broken leaf springs. This unique design is also very effective at eliminating swaying and rolling characteristics, especially in corners. Installation is easy and and can be quickly accomplished with only a few bolts; no clamps, drilling, or air system components. The end result of a Maxloader Spring Support System is a vehicle that rides smoother and more level, with evenly distributed weight resulting in less strain to the drivetrain and suspension components. All Maxloader Systems are backed by a Lifetime Warranty. |
|
| Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Tahoe 1992 to 2008 W/ Steel Leaf Springs | | Maxloader60 x 32 x 75 inches80 poundsList Price: $449.00Price: $399.00 | Additional Support: The Maxloader Spring Support Systems provides additional spring support to your truck or SUV. The Maxloader was designed to assist the factory leaf springs when they compress down onto the helper springs, eliminating pre-tensioning and a constatly stiff ride.
Better Handling/ Control: The Maxloader's design allows for better handling and control while carrying heavy loads. This spring system was designed to provide factory handling and control regardless of what size load your vehicle is carrying. (Always stay within your vehicle's rated GVW load limits.)
Less Sway: The full length design of the Maxloader System allows it to act like an anti-sway bar. It helps prevent rolling and swaying characteristics that often occur when a vehicle becomes too overloaded for the factory suspension.
Level Loads: Maintain a factory ride height and level loads with a Maxloader System. The rear of the vehicle will sit level, eliminating front end lift and un-natural steering tendencies.
Factory Ride: The Maxloader Springs allow your vehicle to maintain a factory ride. While empty, only the factory springs will be working, ensuring a plush and comfortable ride. When the vehicle is loaded, the Maxloader springs begin to interact with the factory springs to provide additional support and level suspension travel. |
| | | Buy Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet Tahoe 1992 to 2008 W/ Steel Leaf Springs from Amazon | | The engineers at Maxloader believe that the customer does not have the time nor the money to invest in a spring system that will eventually fail. To overcome this, the Maxloader Spring Support System was introduced as being both cost effective and safe for the user. The Maxloader System is easy to install, safe for all operations, and will never wear out. The Maxloader installs between the axle and your factory leaf springs. Unlike other systems that mount above the leaf spring and always work against the factory springs, the Maxloader Spring Supports only provide additional support when the factory springs are loaded. This allows for a plush, factory ride during daily commutes, while providing increased support and stability when hauling and/or towing heavy loads. The below the spring mount is designed to only engage when needed and eliminates any pre-tensioning allowing for a factory ride empty or full. The Maxloader springs are as long as your factory leaf springs, providing support to the factory leafs at three key points; both spring ends and in the center mounting location. This ensures an evenly distributed load and prevents fatiguing stress that other systems exhibit and eventually cause broken leaf springs. This unique design is also very effective at eliminating swaying and rolling characteristics, especially in corners. Installation is easy and and can be quickly accomplished with only a few bolts; no clamps, drilling, or air system components. The end result of a Maxloader Spring Support System is a vehicle that rides smoother and more level, with evenly distributed weight resulting in less strain to the drivetrain and suspension components. All Maxloader Systems are backed by a Lifetime Warranty. |
|
| Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Dodge Dakota 1986 to 2004 4WD | | Maxloader60 x 32 x 75 inches80 poundsList Price: $449.00Price: $399.00 | Additional Support: The Maxloader Spring Support Systems provides additional spring support to your truck or SUV. The Maxloader was designed to assist the factory leaf springs when they compress down onto the helper springs, eliminating pre-tensioning and a constatly stiff ride.
Better Handling/ Control: The Maxloader's design allows for better handling and control while carrying heavy loads. This spring system was designed to provide factory handling and control regardless of what size load your vehicle is carrying. (Always stay within your vehicle's rated GVW load limits.)
Less Sway: The full length design of the Maxloader System allows it to act like an anti-sway bar. It helps prevent rolling and swaying characteristics that often occur when a vehicle becomes too overloaded for the factory suspension.
Level Loads: Maintain a factory ride height and level loads with a Maxloader System. The rear of the vehicle will sit level, eliminating front end lift and un-natural steering tendencies.
Factory Ride: The Maxloader Springs allow your vehicle to maintain a factory ride. While empty, only the factory springs will be working, ensuring a plush and comfortable ride. When the vehicle is loaded, the Maxloader springs begin to interact with the factory springs to provide additional support and level suspension travel. |
| | | Buy Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Dodge Dakota 1986 to 2004 4WD from Amazon | | The engineers at Maxloader believe that the customer does not have the time nor the money to invest in a spring system that will eventually fail. To overcome this, the Maxloader Spring Support System was introduced as being both cost effective and safe for the user. The Maxloader System is easy to install, safe for all operations, and will never wear out. The Maxloader installs between the axle and your factory leaf springs. Unlike other systems that mount above the leaf spring and always work against the factory springs, the Maxloader Spring Supports only provide additional support when the factory springs are loaded. This allows for a plush, factory ride during daily commutes, while providing increased support and stability when hauling and/or towing heavy loads. The below the spring mount is designed to only engage when needed and eliminates any pre-tensioning allowing for a factory ride empty or full. The Maxloader springs are as long as your factory leaf springs, providing support to the factory leafs at three key points; both spring ends and in the center mounting location. This ensures an evenly distributed load and prevents fatiguing stress that other systems exhibit and eventually cause broken leaf springs. This unique design is also very effective at eliminating swaying and rolling characteristics, especially in corners. Installation is easy and and can be quickly accomplished with only a few bolts; no clamps, drilling, or air system components. The end result of a Maxloader Spring Support System is a vehicle that rides smoother and more level, with evenly distributed weight resulting in less strain to the drivetrain and suspension components. All Maxloader Systems are backed by a Lifetime Warranty. |
|
| Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet S10 Pickup 1982 to 2003 2WD & 4WD | | Maxloader60 x 32 x 75 inches80 poundsList Price: $449.00Price: $399.00 | Additional Support: The Maxloader Spring Support Systems provides additional spring support to your truck or SUV. The Maxloader was designed to assist the factory leaf springs when they compress down onto the helper springs, eliminating pre-tensioning and a constatly stiff ride.
Better Handling/ Control: The Maxloader's design allows for better handling and control while carrying heavy loads. This spring system was designed to provide factory handling and control regardless of what size load your vehicle is carrying. (Always stay within your vehicle's rated GVW load limits.)
Less Sway: The full length design of the Maxloader System allows it to act like an anti-sway bar. It helps prevent rolling and swaying characteristics that often occur when a vehicle becomes too overloaded for the factory suspension.
Level Loads: Maintain a factory ride height and level loads with a Maxloader System. The rear of the vehicle will sit level, eliminating front end lift and un-natural steering tendencies.
Factory Ride: The Maxloader Springs allow your vehicle to maintain a factory ride. While empty, only the factory springs will be working, ensuring a plush and comfortable ride. When the vehicle is loaded, the Maxloader springs begin to interact with the factory springs to provide additional support and level suspension travel. |
| | | Buy Maxloader Overload Spring Support Systems Standard Spring Kits (2,500 lb Capacity) Chevrolet S10 Pickup 1982 to 2003 2WD & 4WD from Amazon | | The engineers at Maxloader believe that the customer does not have the time nor the money to invest in a spring system that will eventually fail. To overcome this, the Maxloader Spring Support System was introduced as being both cost effective and safe for the user. The Maxloader System is easy to install, safe for all operations, and will never wear out. The Maxloader installs between the axle and your factory leaf springs. Unlike other systems that mount above the leaf spring and always work against the factory springs, the Maxloader Spring Supports only provide additional support when the factory springs are loaded. This allows for a plush, factory ride during daily commutes, while providing increased support and stability when hauling and/or towing heavy loads. The below the spring mount is designed to only engage when needed and eliminates any pre-tensioning allowing for a factory ride empty or full. The Maxloader springs are as long as your factory leaf springs, providing support to the factory leafs at three key points; both spring ends and in the center mounting location. This ensures an evenly distributed load and prevents fatiguing stress that other systems exhibit and eventually cause broken leaf springs. This unique design is also very effective at eliminating swaying and rolling characteristics, especially in corners. Installation is easy and and can be quickly accomplished with only a few bolts; no clamps, drilling, or air system components. The end result of a Maxloader Spring Support System is a vehicle that rides smoother and more level, with evenly distributed weight resulting in less strain to the drivetrain and suspension components. All Maxloader Systems are backed by a Lifetime Warranty. |
|
|
|
